Aqua One Ocellaris 3000 Manuel - Sayfa 6

Evcil Hayvan Bakım Ürünü Aqua One Ocellaris 3000 için çevrimiçi göz atın veya pdf Manuel indirin. Aqua One Ocellaris 3000 13 sayfaları.

Starting Your Filter

Method 1

Note: Ensure the tap connector is secured by pressing

the locking lever (white ) down. Ensure the flow valve

(orange) is in the ON position by pressing the lever

down. Once the filter is running double check the fittings

and seals for water tightness.

1. The primer for your canister filter is located at the

top of the head unit. Open the primer by unscrewng

the cap. Fill the canister using water siphoned from the

aquarium or via a hose from a tap (add water conditioner

if using tap water). Fill the canister slowly as it may be

difficult to judge when the filter is full. Once the canister

is full, replace the cap.

2. Now the canister filter is ready to be plugged in.

3. Due to the volume of water in the canister filter, it

may be necessary to top up the water in the aquarium.

Add water conditioner to water that is added.

Method 2

1. Temporarily detach the outlet from the tubing and

create a siphon by sucking on the tube. Once the

siphon begins, lower the outlet tube into a bucket.

2. Wait until the canister is completely full of water. You

will know this when the water starts to flow into the

bucket.

3. Place your thumb over the open end of the tubing

and affix the outlet pipe to your aquarium.

4. Now the canister filter is ready to be plugged in.

5. Due to the volume of water in the canister filter, it

may be necessary to top up the water in the aquarium.

Add water conditioner to water that is added.

Locking Lever: Open

Flow Valve: Closed

Locking Lever: Locked

Flow Valve: Closed

Locking Lever: Locked

Flow Valve: Open