Billi Quadra Kullanıcı Kılavuzu - Sayfa 8
Sıhhi Tesisat Ürünleri Billi Quadra için çevrimiçi göz atın veya pdf Kullanıcı Kılavuzu indirin. Billi Quadra 13 sayfaları. Xl, xt, xr tap options
Ayrıca Billi Quadra için: Kurulum Kılavuzu (8 sayfalar), Kullanıcı Kılavuzu (12 sayfalar), Kurulum Kılavuzu (7 sayfalar)

- 1. Warnings & Important Information
- 1. Warnings & Important Information
- 2. General Maintenance
- 2. General Maintenance
- 3. Features and Modes
- 3. Features and Modes
- 4. Options and Operation
- 4. Options and Operation
- 5. Safety Switch Settings
- 5. Safety Switch Settings
- 6. Dispenser Icon Codes
- 6. Dispenser Icon Codes
- 7. Dispenser Icon
- 7. Dispenser Icon
- 8. Filter Change Due Monitor
- 8. Filter Change Due Monitor
User guide
Billi Quadra & Quadra Sparkling Plus – XL.
Filter removal and
replacement instructions
Important note: Please ensure you remove the
foam packing under the filter before installing .
1 . Remove the front panel .
2 . Place the unit in Holiday Mode by
pressing the Pressure Relief button once .
The lights on the dispenser will alternate
and then go off
3 . Hold filter and swing towards you slowly .
The top of the filter is in a hinged cradle
assembly . It should stop after approximately
30 degrees of travel .
4 . The filter can now be released from the
holding cradle by pulling down on the filter .
5 . Take care not to spill water in the base of the
tray . If so wipe gently with absorbent paper .
6 . Install new filter into the same location
by pushing all the way up into the cradle .
7 . Push filter back into the unit until it locks
into place . Power light should come back on .
8 . Flush chilled side until water flow stops .
Wait 10 minutes .
Repeat these steps 2 times .
9 . Check for any leaks from around the
filter, hosing or pipeworks .
10 . Replace the front cover .
8