Avonic CD500 Kullanıcı Kılavuzu - Sayfa 14

Bilgisayar Donanımı Avonic CD500 için çevrimiçi göz atın veya pdf Kullanıcı Kılavuzu indirin. Avonic CD500 19 sayfaları.
Ayrıca Avonic CD500 için: Kullanıcı Kılavuzu (20 sayfalar), Hızlı Kılavuz (2 sayfalar), Hızlı Kılavuz (2 sayfalar)

Sayfayı Yazdır

Connecting the components to the CD500

Execute the following steps to connect the components to the CD500:

1. Connect all provided components (see

2. Connect a HDMI cable to the HMDI port of the CD500 to see its video output.

3. Connect a Ethernet (CAT6a) cable to the ethernet port at the front of the CD500.

4. Connect the supplied power cable and adapter to the PSU port at the back of the CD500. After connecting

the power cable and adapter the CD500 will start automatically. The power light next to the Ethernet port will

turn ON. See the pictures below:

Download User Manuals

You can also download the

additional steps necessary to configure the CamDirector

Compatible hardware list

The following hardware is compatible with the CD500:

Audio Interfaces

•

Focusrite Scarlett 2i2 3rd Gen

•

Focusrite Scarlett 4i4 3rd Gen

•

Behringer U-Phoria UMC204HD

Package

Contents) to the ports at the back of the CD500

manuals

for the activated software modules and follow those instructions for the

Cameras

•

AV-CM70-IP

•

AV-CM70-NDI

•

AV-CM71-IP

•

AV-CM73-IP

1. RCA port (Audio Line IN)

2. RCA port (Audio Line OUT)

3. USB3.0 port

4. HDMI 2.0 a/b port

5. RS232 port (for future use)

6. RS485 port (for future use)

7. GPIO Harting, har-flexicon port

8. PSU port (to connect the provided power adapter)

system further.