AvonSynth AVS-LFO-2 Kullanıcı Kılavuzu - Sayfa 2
Kayıt Ekipmanları AvonSynth AVS-LFO-2 için çevrimiçi göz atın veya pdf Kullanıcı Kılavuzu indirin. AvonSynth AVS-LFO-2 3 sayfaları. Voltage controlled lfo
Sayfayı Yazdır
The
User Guide
Features & Specifications
Fully analogue Voltage Controlled LFO module with range from approx. 0.1Hz to approx. 20Hz
10 HP wide (50.5mm), 20mm deep
Current consumption: +12V 55ma, -12V 55ma
Flexible control of frequency with attenuated CV input
Separate Fine-tune control allows high accuracy frequency setting
3-position speed rocker switch for selecting frequency ranges
Skew control morphs triangle output from sawtooth through triangle to ramp waveforms
Skew CV input with attenuator for creative waveshape modulation
Pulse output with pulse-width modulated by Skew knob and CV
Sine wave output that skews left and right with Skew knob and CV
Reset input that accepts a trigger-style signal and resets the LFO to the mid-point
Reset polarity switch selects the direction the LFO travels after being reset
Dual-colour LED indicator that shines with proportionate brightness red when the output is
positive, and green when the output is negative
Frequency & Fine Tuner
Frequency knob controls the rate of
the LFO's oscillation in conjunction
with the Fine tune knob, Frequency CV,
and Speed switch.
Skew & Skew CV
Skews the shape of all three
outputs as shown in the
'Skew Behaviour' box on
the right-hand side.
Reset Behaviour
Output - Reset Switch -
Output - Reset Switch +
Reset Input
www.AvonSynth.com
Voltage Controlled
Description of Functionality
AVS-LFO-2
LFO
LFO Position Indicator
Shines red when the LFO is in the
positive side of its cycle, and green
when in the negative side. Brightness is
proportional to distance from ground.
Skew Behaviour
Sine Output
Triangle Output
Pulse Output
Skew knob position
Skew knob position
and CV value
0%
100%
Centre
Page 2 of 3