Aqua One ReefSys 255 Manuel - Sayfa 7
Akvaryumlar Aqua One ReefSys 255 için çevrimiçi göz atın veya pdf Manuel indirin. Aqua One ReefSys 255 16 sayfaları.
Sayfayı Yazdır
I
I
P P
NSTALLING
NSTALLING
LUMBING
LUMBING
Place upper plumbing assemblies as
shown to the right. Insert the threads
into the holes in the bottom of the over-
flow.
Ensure that the pipes are in the order
shown according to which ReefSys
aquarium you have
It is easiest to place the complete fit-
tings one at a time.
Position lower plumbing assemblies as
shown and secure them by hand tight-
ening the bulkheads as shown.
Be sure to check that they are posi-
tioned correctly in relation to the sump.
Attach the flexible outlet as shown below.
Preparing and
Preparing and
Attaching Hoses
Attaching Hoses
Straightening Hose
Straightening Hose
The hose included may have been
The hose included may have been
coiled for months in the box.
coiled for months in the box.
Because of this, it will tend to
Because of this, it will tend to
remain "curly".
remain "curly".
To reduce this, soak the hose in hot
To reduce this, soak the hose in hot
(not boiling) water for ten minutes.
(not boiling) water for ten minutes.
Then position it straight until it
Then position it straight until it
cools down.
cools down.
Fitting hose to pipes
Fitting hose to pipes
Fill a cup with hot (not boiling)
Fill a cup with hot (not boiling)
water and soak the end of the hose
water and soak the end of the hose
for a few minutes. While
for a few minutes. While
the hose end is hot, push
the hose end is hot, push
it at least 2cm onto the
it at least 2cm onto the
fitting and allow to cool.
fitting and allow to cool.
Placing and tightening the plumbing fittings is
Placing and tightening the plumbing fittings is
best done with two people. While one person
best done with two people. While one person
places and holds the upper fittings in place, the
places and holds the upper fittings in place, the
other can attach and tighen the lower assemblies.
other can attach and tighen the lower assemblies.
ReefSys 255
C
C
R R
ONNECTING
ONNECTING
ETURN
ETURN
Connect the return hose to
the quick connect coupling.
Use hose clamps to secure
the connection.
Inspiring Excellence in Fish Care!
ReefSys 326
H H
OSE
OSE
ReefSys 255 Shown
Connect the return hose
to the lower return pipe.
Secure with a hose clamp.
7