Aqua One MariSys 240 Manuel - Sayfa 13
Su Filtrasyon Sistemleri Aqua One MariSys 240 için çevrimiçi göz atın veya pdf Manuel indirin. Aqua One MariSys 240 15 sayfaları.
Ayrıca Aqua One MariSys 240 için: Hızlı Kurulum Kılavuzu (2 sayfalar)
Sayfayı Yazdır
Trouble Shooting
LARGE AMOUNTS OF
BUBBLES AND WATER ARE
BEING PROPELLED INTO THE
COLLECTION CUP
1. Reduce air supply to Skimmer by adjusting
Air Control Valve.
2. If bubbles and water are still rapidly filling
the cup, unscrew the Skimmer Height Adjuster
and lower the 0 Ring 1.5cm. Raise the
Collection Chamber upward 2.5cm and
reassemble.
PROTEIN SKIMMERS
BUBBLES ARE TOO LARGE
1. Wood airstone needs to be replaced.
2. Adjust Air Control Valve a quarter turn
clockwise to close and then wait 5 minutes, if
still too big turn the screw another quarter turn.
PROTEIN SKIMMER'S
BUBBLES ARE TOO SMALL
1. Adjust Air Control Valve a quarter turn
anti-clockwise to open and then wait 5
minutes, if still too few turn the screw another
quarter turn.
PROTEIN SKIMMER AIR PUMP
IS BECOMING NOISY
1. Check wood airstone to see if it is still
producing large amount of bubbles, replace
wood airstone as airstone wears.
2. Replace diaphragms in the Protein Skimmer
Air Pump with new ones.
3. Check air line for kinks.
4. Check the Air Control Valve and Check
Valve.
OVERFLOW BOX NOT
FUNCTIONING
1. Check power supply and confirm Priming
Pump is plugged in.
2. No water in Overflow Box, add water.
3. Check Overflow Box for obstacles.
4. Check Hosing and Tubing for kinks or
obstructions.
PRIMING PUMP NOT
RUNNING
1. Check power supply and confirm Priming
Pump is plugged in.
2. Ensure the airline is correctly inserted into
the red ports on the Priming Pump. Arrow in is
water in from the V-Joint on the Water bridge.
3. Open Priming Pump Housing and confirm
diaphragm is moving.
4. Replace Priming Pump Diaphragm and
Flappers with new rebuilt kit.
PRIMING PUMP RUNNING BUT
WATER FLOW IS MINIMAL
1. Possible clogged airline, remove airline
tubing and run under hot water through or
replace and reinstall.
2. Replace Priming Pump Diaphragm and
Flappers with new rebuilt kit.
WATER LEVEL IN FILTER BOX
TO HIGH
1. Raise height of Overflow Box by turning
height Adjusting Screws clockwise.
2. Raise height of Overflow Box by adjusting
the Water Level Adjuster.
3. Remove some water from aquarium.
13