CPA BC 2.2 Series Talimat ve Kullanım Kılavuzu - Sayfa 5

Gıda İşlemcisi CPA BC 2.2 Series için çevrimiçi göz atın veya pdf Talimat ve Kullanım Kılavuzu indirin. CPA BC 2.2 Series 10 sayfaları.

Sayfayı Yazdır
3.

Connections and Indications

Indications
Overcurrent
Active
Power
DC Buss Voltage
Connections of the terminal blocks
Grounding: Large-area earthing of the cover is
recommended, e.g. mounting on a galvanized
assembly plate.
BUSS-
-connection BUSS-voltage inverter
BUSS+
+connection BUSS-voltage inverter
R1 - R2
a bimetal relay must be connected in series to the
braking resistor. This has to be adjusted to the nominal
current of the brake resistor. (see Chapter 4 Example
of Connection)
3.1

Design

Dipswitch S1
(Mainboard)
Misprints and technical changes reserved
red
Overcurrent/Short circuit
clear
Chopper is active
green
Chopper is ready
red
Buss Voltage
Caution !
1.
Do not connect or disconnect the chopper under voltage.
2.
Please take care of the correct polarity.
3.
If you exchange the connections BUSS + and BUSS- the inverter or the
chopper can be destroyed.
4.
Ultrafast semiconductor fuses for the protection of the IGBT is not
installed.
ON
OFF
Dipswitch S1.7:
without Master/Slave-Option ON
at Master/Slave-Option
(Optionsboard)
OFF
Instruction and Operation Manual
5