CPC 811-4850 Manuel - Sayfa 2
Güvenlik Sistemi CPC 811-4850 için çevrimiçi göz atın veya pdf Manuel indirin. CPC 811-4850 8 sayfaları. Alarm panel
Sayfayı YazdırA]ARM
485
SET UP AND OPERATION
1. Modes of Operation
There are two modes of operation for the
unit.
They are:
Mode
Display lndication
1.
No Unacknowledged
Alarms
Date/Time &
.'NO
AIARMS" displayed.
You may press an arrow key to view
any
"old" alarms in memory.
2. Unacknowledged
alarms
Date/Time
&'Al-ARMS"displayed.
Press an arrow key to view current
alarms.
Press "RESET' ONCE TO
SILENCE, TWICE TO COMPLETELY
RESET
ALAHM.
lf alarm reoccurs,
the
annunciator will sound again.
When the unit
is
first powered
ON,
the display will indicate the time, date, and
"NO
A1-ARMS".
lf
the unit'has been powered rip
Sireviously,
the internal memory may contain
alarm
messages.
lf
this
is
the
c'ase,
the
stored. alarms may
be reviewed by press.ing
.
either of the
irrow buttons.
lf
no alarms have been stored, the display will show blank
alarms when scrolling with the arrow buttons.
-
2. Displaying Alarms
The
following will describe the use
of
the arrow buttons to scrollthrough alarms stored
in memory.
The alarm messages may be thought of as a list on a sheet of
paper.
The display is
simply
a
window moving'up or down the page viewing the first two or second two
lines
of any one
alarm. Eaclialarm
is made up
olfour
lines (two screens).
The down arrow will take you to the second two lines of an alarm, or to
the
next alarm,
depending on where
you
-are
at when
you press
it.
The first
two lines of an alarm give
informatioh about timir and date and unit number, the second two lines give a
description of the
alarm.
The up arrow
willtake you to previous
alarms or from the second
two
lines of a given
alarm to the first
two
lines of that alarm.
Pressing both arrow keys simultaneously
will
set
the display back to viewing
.'A[-ARMS"
or
"NO ALARMS" and
ttie
scrolling wind6w back to Alarm
#1.
The unit will store a
maximum of 20 alarms.