DFI ST102-SD Kurulum Kılavuzu - Sayfa 6
Endüstriyel PC DFI ST102-SD için çevrimiçi göz atın veya pdf Kurulum Kılavuzu indirin. DFI ST102-SD 7 sayfaları.
Sayfayı Yazdır
4. Place the SATA drive bay back in the chassis and install the SATA drive bay
using the mounting screws you removed in step 1.
Mounting screw
5. Connect the SATA data/power cable to the SATA drive (refer to the
above picture). Make sure the other end of the SATA data/power cable
is connected to the connectors on the system board (refer to the picture
below).
SATA power/
data cable
6
SATA data
connector
SATA power
connector