DFM Activor RSI02 Manuel

Uzaktan Kumanda DFM Activor RSI02 için çevrimiçi göz atın veya pdf Manuel indirin. DFM Activor RSI02 2 sayfaları.

Activor® Remote Control RSI02 (S1890A) Manual

General

RSI02 remote kit comprises one receiver, two pre-learned remotes, a 4-wire harness and a quick mounting

plate. Through Jumper Setting, It can be set to work with NX/Reliance alarm panels or DSC panel such as

PC1565(Power632), PC5020(Power864), PC1616/1832/1864 to operate Arm (away/stay), Disarm and Panic

via the keypad data bus. The receiver is also equipped with two relays that can be used to operate other

devices such as garage door.

Jumper Setting

The 4-pin jumper can be found in the upper middle of the receiver.

For NX/Reliance panel: ensure the 2-pin jumper cap remains to be placed across pin1 and 2, as

For DSC panel: ensure the 2-pin jumper cap is removed from the socket.

Quick Start and Play

For NX/Reliance panel:

Connect 4-wire harness directly to the panel or keypad: Pos Red; Com Black and Data Green – Yellow is not

used.

For DSC panel:

Connect 4-wire harness directly to the panel or keypad, follow colour code then PLUG into the receiver and

PLAY. The receiver is automatically recognized by the panel – no need to use User Code for enrolment.

Receiver layout

Receiver

Button Operation – default setting

Button 1:

Press and quick release = Away; press and hold for 3 seconds = Stay

Button 2:

Disarm from Arm away/stay, or Panic

Button 3:

Relay 1 output momentary

Button 4:

Relay 2 output momentary

Press button 1&2 simultaneously for 3 seconds = Panic

June 2018