Allied Telesis CentreCOM GS980M Series Hızlı Kurulum Kılavuzu - Sayfa 17
Anahtar Allied Telesis CentreCOM GS980M Series için çevrimiçi göz atın veya pdf Hızlı Kurulum Kılavuzu indirin. Allied Telesis CentreCOM GS980M Series 20 sayfaları. Gigabit ethernet switches
Sayfayı Yazdır
Fault LED
Off
Flashing amber
Power LED
Solid green
Off
USB LED
Off
Solid green
Flashing green
Flashing amber
Starting a Local Management Session
The Console port on the front panel is used to manage the switch.
locally. The switch does not need an IP address for local
management.
Local management through the Console port requires a management
cable. There are two cables. One cable comes with the switch. It is
2m (6.6 ft) long with RJ-45 (8P8C) and DB-9 (D-sub 9-pin)
connectors. See "Unpacking the Switch" on page 5.
CentreCOM GS980M Series Quick Installation Guide
The switch is operating normally or is not
powered on.
The switch is experiencing a problem. View
the log messages to troubleshoot the problem.
The power supply is operating normally.
Possible conditions of this state include:
- The power supply is not receiving power.
- The switch has overheated and shut down.
- The input AC power is outside its operating
range.
- The power supply has failed.
The USB slot is empty or the LEDs are off.
The switch has detected a USB drive in the
slot.
The switch is writing to or reading from the
USB drive.
The switch encountered an error with the USB
drive.
17