CPG 351GUCPG36M Kullanıcı Kılavuzu - Sayfa 6

Kalbur CPG 351GUCPG36M için çevrimiçi göz atın veya pdf Kullanıcı Kılavuzu indirin. CPG 351GUCPG36M 15 sayfaları. Electric countertop griddles

User Manual

Installation

WARNING:

IMPROPER INSTALLATION, ADJUSTMENT, ALTERATION, SERVICE, OR MAINTENANCE CAN

CAUSE PROPERTY DAMAGE, INJURY, OR DEATH.

READ THE INSTALLATION, OPERATING, AND MAINTENANCE INSTRUCTIONS THOROUGHLY

BEFORE INSTALLING OR SERVICING THIS EQUIPMENT.

THESE UNITS ARE SUITABLE FOR INSTALLATION ON NON-COMBUSTIBLE SURFACES ONLY.

DO NOT INSTALL NEAR ANY COMBUSTIBLE SURFACES OR ANY OTHER EQUIPMENT.

DO NOT STORE OR USE GASOLINE OR OTHER FLAMMABLE VAPORS AND LIQUIDS IN

THE VICINITY OF THIS OR ANY OTHER EQUIPMENT.

Combustible Clearance Requirements: 8" Sides, 8" Back

LOCATING AND LEVELING THE UNIT

•

For non-combustible surfaces, do not install the unit closer than 1" from a side wall and/or closer

than 1" from a rear wall.

•

Your griddle includes four adjustable feet. Ensure that all feet are installed correctly before the

operation of this griddle.

•

Level unit by adjusting the (4) feet which have an adjustment of 1¾" (43.75mm) for accurate

leveling and perfect line-up with other CPG series units.

EXHAUST CANOPY

•

This product conforms to UL-197 standards and is required to be installed under a ventilation

hood in accordance with all applicable codes.

•

A vertical distance of not less than 48" shall be provided between the top of the appliance and

filters or any other combustible material.

•

Exhaust installation must conform to local codes.

•

The griddles are designed to operate only for the voltages indicated on the data plate attached to

this griddle, and for alternating current (AC) only.

•

208/240V service for all models. All units must be hard-wired at installation for 1-phase and

3-phase service. For supply connections use copper wire only, suitable for at least 90°C (194°F).

For 48" griddle, 3-phase parallel supply on 3-phase, dual supply on single phase.

•

The unit is required to have at least 1" of clearance on the sides and back from non-combustible

surfaces, or at least 8" of clearance on the sides and back from combustible surfaces. Ensure that all

four 4" adjustable legs are installed correctly before the operation of this griddle. The unit is required

to be installed on a non-combustible surface with 4" legs, or a combustible floor with a stand.