avsi 178.696UK Kullanıcı Kılavuzu - Sayfa 2
Monitör avsi 178.696UK için çevrimiçi göz atın veya pdf Kullanıcı Kılavuzu indirin. avsi 178.696UK 4 sayfaları. Stage wedge monitors
Sayfayı Yazdır
Introduction
Thank you for choosing a Citronic CM-series stage wedge monitor. These units are available in passive and active
versions and can be positioned free-standing or pole-mounted via the 35mm socket. Please read this manual to achieve
optimum performance from your speaker cabinet and avoid damage through misuse.
Package Contents
•
CM-series stage wedge monitor
•
Mains lead (active models only)
If you find any part is missing or the product has arrived with any problems, please contact your retailer at once.
This product contains no user-serviceable parts, so make no attempt to try to fix or modify this item yourself as this will
invalidate the warranty. We recommend you keep the original package and proof of purchase for any possible
replacement or return issues.
Please note below for active models
Warning
To prevent the risk of fire or electric shock, do not expose any of the components to rain or moisture.
Avoid impact to any of the components.
No user serviceable parts inside - refer servicing to qualified service personnel.
Safety
•
Please observe the following warning conventions
•
Ensure that the correct mains lead is used with adequate current rating and mains voltage is as stated on the unit
•
Avoid ingress of water or particles into any part of the housing. If liquids are spilled on the cabinet, stop using
immediately, allow the unit to dry out and have checked by qualified personnel before further use
Warning: this unit must be earthed
Placement
•
Keep the electronic parts out of direct sunlight and away from heat sources.
•
Position the cabinet on a stable surface or stand that is adequate to support the weight of the product.
•
Allow adequate space for cooling and access to controls and connections at the rear of the cabinet.
•
Keep the cabinet away from damp or dusty environments.
Cleaning
•
Use a soft dry or slightly damp cloth to clean surfaces of the cabinet
•
A soft brush can be used to clear debris from controls and connections without damaging them
•
To avoid damage, do not use solvents to clean any parts of the cabinet.
CAUTION: RISK OF ELECTRIC SHOCK
This symbol indicates that dangerous voltage constituting a risk of electric shock is present within this
This symbol indicates that there are important operating and
DO NOT OPEN
unit
maintenance
literature accompanying this unit.
instructions in the
CM-series Stage Wedge Monitor User Manual