DG FPGA Kurulum - Sayfa 16

Bilgisayar Donanımı DG FPGA için çevrimiçi göz atın veya pdf Kurulum indirin. DG FPGA 18 sayfaları.
Ayrıca DG FPGA için: Kurulum (5 sayfalar), Kurulum (14 sayfalar), Kurulum (20 sayfalar), Kurulum (8 sayfalar), Kurulum (10 sayfalar)

Sayfayı Yazdır

dg_toe100gip_fpgasetup_xilinx.doc

The step to setup test environment by using two FPGAs is described in more details as

follows.

Follow step 1) – 7) of topic 2 (Test environment setup when using FPGA and PC) to prepare

FPGA board and SFP28/QSFP28 connection for running the demo. After two FPGA boards

have been configured completely, Serial console/JTAG Terminal displays the menu to select

Client mode, Server mode, or Fixed MAC mode. The step after FPGA configuration is

described as follows.

1) Open Serial console/JTAG Terminal for board#1 and board#2 and then set the input to the

console for selecting the initialization mode. The example to initialize by Server-Client

mode is described as following steps.

i) Set '1' on Serial console of FPGA board#1 for running Server mode.

ii) Set '0' on Serial console of FPGA board#2 for running Client mode.

iii) Default parameters for Server or Client are displayed on the console, as shown in

Figure 3-2.

28-Apr-21

Figure 3-2 Input mode

Page 16