Allied Telesis Rapier i series Nasıl Yapılandırılır - Sayfa 5
Anahtar Allied Telesis Rapier i series için çevrimiçi göz atın veya pdf Nasıl Yapılandırılır indirin. Allied Telesis Rapier i series 9 sayfaları. Virtual router redundancy protocol
Ayrıca Allied Telesis Rapier i series için: Sorun Giderme Kılavuzu (8 sayfalar), Sorun Giderme (5 sayfalar)
Sayfayı Yazdır
7. Give the VLANs IP addresses
8. Configure VRRP
Turning on adoptvrip means that the master adopts the VRRP IP address. This means you
can use the VRRP IP address to ping the current master, or to connect to it through telnet,
SSH, HTTP, SSL or SNMP. Also, DNS relay continues functioning via the same IP address at all
times.
Page 5 | AlliedWare™ OS How To Note: VRRP
enable ip
add ip int=vlan1 ip=192.168.1.1
add ip int=vlan2 ip=192.168.2.1
add ip int=vlan3 ip=192.168.3.1
...
enable vrrp
create vrrp=1 over=vlan1 ipaddress=192.168.1.3 priority=150
adoptvrip=on
create vrrp=2 over=vlan2 ipaddress=192.168.2.3 priority=150
adoptvrip=on
create vrrp=3 over=vlan3 ipaddress=192.168.3.3 priority=150
adoptvrip=on
...
Core 1 (master) configuration