DG NVMeG4-IP Talimatlar Kılavuzu - Sayfa 4
Anakart DG NVMeG4-IP için çevrimiçi göz atın veya pdf Talimatlar Kılavuzu indirin. DG NVMeG4-IP 16 sayfaları. Nvme ip with pcie gen4 soft ip
Sayfayı Yazdırdg_nvmeg4ip_instruction_xilinx_en.doc
3) Connect two micro USB cables between FPGA board and PC for FPGA programming and
Serial console.
4) Power on FPGA development board and AB18 adapter board.
5) On PC, the additional COM ports are detected after connecting USB cables to FPGA
board. There are more than one COM ports detected. Select Standard COM port, COM11
in Figure 2-5.
On Serial console, the setting is as follows.
Buad rate=115,200, Data=8-bit, Non-Parity, and Stop = 1.
20-Apr-20
Figure 2-3 USB cable connection
Figure 2-4 Turn on power switch
Figure 2-5 Select and set COM port
Page 4