DG UDP10G-IP Kurulum Kılavuzu - Sayfa 9
Anakart DG UDP10G-IP için çevrimiçi göz atın veya pdf Kurulum Kılavuzu indirin. DG UDP10G-IP 18 sayfaları. Fpga setup with cpu demo
Sayfayı Yazdırdg_toeudp10gip_fpgasetup_intel.doc
6) Open QuartusII Programmer to program FPGA through USB-1 by following step.
a. Click "Hardware Setup..." to select USB-BlasterII[USB-1].
b. Click "Auto Detect" and select FPGA number.
c. Select Arria 10/Cyclone 10/Stratix 10 device icon.
d. Click "Change File" button, select SOF file in pop-up window and click "open" button.
e. Check "program".
f. Click "Start" button to program FPGA.
g. Wait until Progress status is equal to 100%.
26-Aug-20
Figure 1-8 FPGA Programmer
Page 9