DG AB19-M2PCI Manuel - Sayfa 3

Adaptör DG AB19-M2PCI için çevrimiçi göz atın veya pdf Manuel indirin. DG AB19-M2PCI 7 sayfaları. M.2-pcie adapter board

Supporting Accessory

This product includes following accessories.

[Accessories].



support board: 1pcs



wing nut: 2 pcs



M3 spacer (male/female): 2 pcs.



M3 screw: 2 pcs.

Assemble the support accessory to the adapter board as shown in Figure 4. When the adapter board is

connected to the FPGA board, use wing nut so that adapter is properly oriented vertically. The spacer should

be screwed on from the solder side of the adapter using M3 screws through the inner side holes.

Adjustable wing nut

on male thread side

30mm length male-female type M3 spacer

Figure-4: adapter with supporting board assembly

Fix spacer by M3 screw from

solder side of the adapter

Page 3/7