CPI 1.2M Ku-BAND Tx Montaj Kılavuzu - Sayfa 5

Anten CPI 1.2M Ku-BAND Tx için çevrimiçi göz atın veya pdf Montaj Kılavuzu indirin. CPI 1.2M Ku-BAND Tx 15 sayfaları.

CPI Satcom & Antenna Technologies

SECTION I

1.0

This manual describes the assembly and installation of CPI's 1.2 meter antenna

system. The CPI 1.2 meter is a rugged and reliable mount which will operate in the

Ku-Band frequency with high efficiency and at the same time successfully

withstand the effects of the environment. The CPI 1.2 meter has an f/d ratio of .8

and an offset angle of 17.30°.

These instructions are listed by sections that cover all areas of assembly and

installation. Additional sections are included in the manual to provide information

on antenna alignment to the satellite and maintenance.

1.1

UNPACKING AND INSPECTION

The system containers should be unpacked and inspected at the earliest date to

insure that all material has been received and is in good condition. A complete

packing list for each major component is supplied.

1.2

Any damage to materials while in transit should be immediately directed to the

freight carrier. He will instruct you on matters regarding any freight damage claims.

MATERIAL – MISSING OR DAMAGED

1.3

Any questions regarding missing or damaged materials that are not due to the

freight carrier should be directed to CPI's Customer Service Department at:

INTRODUCTION

CPI Satcom & Antenna Technologies

1700 Cable Drive NE

Conover NC 28613 USA

Phone 770-689-2040

www.cpii.com

1.2M Ku-BAND Rx/Tx SERIES 1132

4096-630