Avsl 953.230UK Kullanıcı Kılavuzu - Sayfa 4

Mikrofon Avsl 953.230UK için çevrimiçi göz atın veya pdf Kullanıcı Kılavuzu indirin. Avsl 953.230UK 4 sayfaları. Active paging station

Input connections

Mount the gooseneck microphone into the XLR microphone connector on top of the base unit (1).

If a background music or other line level audio source is required, this may be connected to the 3.5mm

Aux input at the rear of the base unit (6). This will play through both zones as stereo left + right to

zone 1 and 2.

Audio connections for the 3.5mm jack is shown opposite.

The Aux signal is governed by the Aux output level control

(7) and the Aux signal indicator will react to the audio

accordingly.

Lastly, connect the supplied power adaptor to the DC input jack on the rear panel (11).

Operation

Turn the Aux Level and Mic Level controls fully down before powering up the COM230.

Ensure the correct supply voltage and then connect the power adaptor to a mains outlet.

If an Aux input is connected, start playback, and gradually increase the Aux level control (7) to check

the output through the speakers.

To test the paging mic, press the Zone 1 and 2 select and Page buttons so that all 3 are lit (3, 4, 5).

Gradually increase the Mic level control (8) whilst speaking into the microphone until the required

output level is heard through the connected speakers.

Note: speech through the microphone will cause the Aux signal level to be muted automatically.

Once the Mic and Aux levels are set to the desired levels, press the Page button so that it is off (not lit)

To page either zone independently, ensure that only that Zone select button (3 or 4) is lit before

pressing the Page button. If both Zone select buttons are lit, paging will address all speakers.

Ensure Aux signal is turned down and Page button is off before powering down to avoid loud noises.

Specifications

Power supply

Output power @ 4 Ohms

Output power @ 8 Ohms

Microphone : connector

Auxiliary input

Speaker outputs

Dimensions

Weight

AVSL (EUROPE) Ltd, Unit 3D North Point House, North Point Business Park, New Mallow Road, Cork, Ireland

16Vdc, 4A power adaptor (included)

2 x 30W

2 x 15W

XLR

Stereo 3.5mm jack

Screw terminals (removeable Euroblock)

450 x 140 x 100mm (assembled)

552g

Disposal: The "Crossed Wheelie Bin" symbol on the product means that the product is classed as

Electrical or Electronic equipment and should not be disposed with other household or commercial waste

at the end of its useful life. The goods must be disposed of according to your local council guidelines.

Unit 2-4 Bridgewater Park, Taylor Rd. Manchester. M41 7JQ

953.230UK User Manual