Avsl qtx 151.554UK Kullanıcı Kılavuzu - Sayfa 4

DJ Ekipmanları Avsl qtx 151.554UK için çevrimiçi göz atın veya pdf Kullanıcı Kılavuzu indirin. Avsl qtx 151.554UK 14 sayfaları. Stereo twin par bar with foot control

Sayfayı Yazdır

Setup/Installation

This lightweight, versatile PAR bar system is prefect for mobile DJs and performers

who need their lighting to be quick to set up and easily transportable. 4 PAR Cans

are each loaded with 5 LEDs in red, green, blue and white for super smooth colour

blending.

1. Remove stands from the carrier and open the tripod legs onto the floor,

make sure it is on a stable footing.

2. Remove the PAR bars from the main carrier and attach them onto the

tripod stand.

3. Tighten the screw to secure the PAR bar.

4. Connect the Power cables on both units.

5. Setting the PAR BARs to Master and Slave (see PAR Bar mode settings.)

6. Connect the multi-core lead to the foot controller and the Master unit.

7. Connect the XLR cable (3 Pins) to the DMX OUT socket on the Master

unit and the DMX IN socket on the Slave unit.

8. Adjust height of the extension pole, insert safety pin and tighten the

locking screw.

Hanging Brackets are included for permanent fitting on trusses (Truss attachments

are not included) or screw to the ceilings. Attach bracket with screw onto the ends of

the PAR bar as shown: -

151.554UK User Manual