DG Technologies DPA 5 Yapılandırma Kılavuzu - Sayfa 5
Teşhis Ekipmanları DG Technologies DPA 5 için çevrimiçi göz atın veya pdf Yapılandırma Kılavuzu indirin. DG Technologies DPA 5 18 sayfaları. Dearborn protocol adapter
Ayrıca DG Technologies DPA 5 için: Hızlı Başlangıç Kılavuzu (2 sayfalar), Hızlı Başlangıç Kılavuzu (2 sayfalar)
Sayfayı Yazdır
Exiting Bluetooth Range and Re-Acquiring Signal
With the various operating systems we have tested with, Bluetooth operations have behaved somewhat differently
and inconsistent. This has been especially so when using a Bluetooth Virtual COM Port for communications and
when the DPA 5 exits signal range and then re-enters signal range. Sometimes the DPA 5 drivers have been able to
re-establish communications, sometimes they have not. Because of this inconsistent behavior, we recommend
staying within signal range during your diagnostic session. Our experience suggests that even with the short range
mini-USB dongle you can circle the vehicle and trailer (if one is attached).
If your Bluetooth DPA 5 goes out of range during operations, the DPA drivers may not recover when the DPA 5
comes back into Bluetooth signal range. If it does go out of range, the easiest way to recover is:
1. Disconnect and exit from your OEM application.
2. Unplug the DPA from the vehicle.
3. If you are using a USB BT dongle.
a. Unplug the USB BT dongle.
b. Insert the USB BT dongle back into the same USB port.
4. Reconnect the DPA 5 to the vehicle.
5. Run Adapter Validation Tool to check if the PC can see the vehicle. If the PC cannot see the vehicle, reboot
the PC.
6. If rebooting the PC does not work, delete the DPA 5 RP1210 DeviceID
7. Delete the DPA 5 Bluetooth device using the Bluetooth icon in the icon tray.
8. Re-create the Virtual COM Port for the DPA (Add Bluetooth Device) using the operating system specific
instructions below.
9. Re-create the RP1210 DeviceID
10. If these instructions do not work, please contact DG Technical Support. We will be glad to help get your DPA
5 communicating through Bluetooth.
Steps in Using the DPA 5 in Bluetooth Mode
As mentioned before the process used to setup the computer to communicate with the DPA isn't very straight forward.
In section 3 we have broken this process down into several steps so that you can easily understand the process. The look
of these steps varies but operating system. In subsequent sections you will see sections devoted to setting up the DPA 5
Bluetooth connection for different Windows Operating Systems.
Install Your DPA 5 Drivers from CD or from Website Download
The software for the DPA 5 can be downloaded from
(Creating a New RP1210
https://www.dgtech.com/downloads/
(Deleting an RP1210
DeviceID...).
DeviceID).
.