2Wire Gateway 100 Series Kurulum Kılavuzu - Sayfa 7

Ağ Geçidi 2Wire Gateway 100 Series için çevrimiçi göz atın veya pdf Kurulum Kılavuzu indirin. 2Wire Gateway 100 Series 19 sayfaları. Usb driver installation for macintosh computers
Ayrıca 2Wire Gateway 100 Series için: Sürücü Kurulumu (1 sayfalar)

Sayfayı Yazdır

Accessing Driver Status

Click the "+" sign next to the

displays a list of all adapters and/or devices that you have installed. Check to see if your adapter is

marked with a yellow question mark (driver not installed) or exclamation point (incomplete driver

installation or driver not compatible with the operating system).

IMPORTANT: If your adapter or device does not appear in the list, it may not be properly installed.

Reinstall the adapter according to the appropriate documentation.

If the USB driver for direct USB connection between the gateway and your

PC has not been installed, one of the following names will appear in the

Other devices category (the name that displays is dependent on your

operating system):

−

2Wire USB Remote NDIS Ethernet

−

2Wire Gateway USB

Double-click the adapter name highlighted with a yellow question mark or

exclamation point.

Click the

Reinstall Driver

the CD.

After you have reinstalled the driver, click the

troubleshooting screen.

and/or

Other devices

button to reinstall the driver for your adapter from

RETRY

Gateway Installation and Support Guide

categories to expand them. This

Network adapters

button on the Setup Wizard adapter