DGC DC-3020 Kullanım Kılavuzu - Sayfa 12

Ölçüm Cihazları DGC DC-3020 için çevrimiçi göz atın veya pdf Kullanım Kılavuzu indirin. DGC DC-3020 20 sayfaları. Ultrasonic thickness gauge

DC-3000 SERIES ULTRASONIC THICKNESS GAUGE

error. If the error is not enough to influence the measuring accuracy, it can

be neglect; otherwise it is necessary to get the accurate sound velocity of

the workpiece to be measured. The "velocity measurement" can be used,

the usage is as follows:

Select T-E mode, Velocity can be neglect, and directly measure the sample

which thickness is known.

Press

measurement",

Press

down the value of velocity to determine the thickness as the same as the

value of sample that is measured,

Press

to store this new velocity,

Press

to confirm.

8.5.1.4 Velocity storage

This function allows users to store 4 new velocities Rate.

8.5.2 Resolution

Users can select the displayed resolution. When selecting the high

accuracy, the workpiece surface to be measured should be smooth, for

the purpose of getting an accurate value.

Press

key into "Resolution",

Press

key into the menu- "SETTING"-"Vel. Rate"-"Vel

to move the arrow, press

to select location where you want to store,

to set resolution and unit.

- 10 -

to up and