2Wire HomePortal 1000SW Kurulum ve Destek Kılavuzu - Sayfa 8
Ağ Geçidi 2Wire HomePortal 1000SW için çevrimiçi göz atın veya pdf Kurulum ve Destek Kılavuzu indirin. 2Wire HomePortal 1000SW 15 sayfaları.
Sayfayı Yazdır
Running Your HomePortal Setup Wizard Manually
If after one minute the HomePortal Setup Wizard does not automatically run:
Double-click the
Windows Users:
Double-click the icon that corresponds to your CD-ROM drive.
Double-click
Double-click the
Mac Users:
Double-click the
Click
Install
Click
Install
Troubleshooting Adapters
This section details troubleshooting procedures to address adapter installation
problems.
Verify That Your Adapter Driver is Properly Installed
There are two common errors that may occur during installation that will result in an
error message:
•
The appropriate adapter driver software was not installed,
•
The adapter driver software was only partially installed or is incompatible with
your operating system.
Follow the procedure appropriate to your operating system to determine whether the
driver was correctly installed.
1. Click
Windows XP:
2. Select
3. Select the
Continue to Step 4 under Accessing Driver Status on page 7.
1. Click
Windows 2000:
2. Double-click the
3. Select the
Continue to Step 4 under Accessing Driver Status on page 7.
Windows 98 SE or Windows ME:
1. Click
2. Click the
3. Select the
Continue to Step 4 under Accessing Driver Status on page 7.
icon located on the desktop.
My Computer
and follow the onscreen instructions.
Setup.exe
icon.
2Wire
icon and click Continue.
2Wire Install
to copy the HomePortal software to a folder.
and follow the onscreen instructions.
and double-click Control Panel
Start
Performance and Maintenance
tab, then click
Hardware
and double-click
Start >Settings
icon.
System
tab and click
Hardware
and double-click
Start >Settings
icon.
System
tab.
Device Manager
6
, then click the
System
.
Device Manager
.
Control Panel
.
Device Manager
.
Control Panel
icon.