Allied Telesis AT-AR256E Hızlı Başlangıç Kılavuzu - Sayfa 3
Ağ Yönlendiricisi Allied Telesis AT-AR256E için çevrimiçi göz atın veya pdf Hızlı Başlangıç Kılavuzu indirin. Allied Telesis AT-AR256E 10 sayfaları. 4-port
Ayrıca Allied Telesis AT-AR256E için: Hızlı Kurulum Kılavuzu (13 sayfalar)
Sayfayı Yazdır
A. Contents
Check that you have received the following items in the AT-AR256E pack.
1. AT-AR256E Router.
2. 240 VAC to 9VDC power adapter.
3. ADSL Phone Cable (BT to RJ11).
4. Ethernet Patch Cable (RJ45 to RJ45).
5. AT-256E Installation Manual and Quick Start Guide.
B. Pre-Installation
Check that the PC you are using to complete this initial setup has a working
Ethernet port and that the IP protocol is installed.
Have your ISP account details available. This is to include the ADSL login and
password information.
Have an ADSL line filter installed onto the incoming telephone line. This can be
done once for the premises in which case there will be an ADSL outlet provide by
the installer. Alternatively, filters can be plugged into all phone outlets on that line
and the phones plugged into the filter. A filter is not required on the phone outlet
that the ADSL router is to use.
C. Connection
Using the Ethernet patch cable connect the PC's NIC interface to the router's
Ethernet port, an RJ45 socket. Plug the power pack into a mains outlet and
connect the DC power cable to the 9VDC power socket on the router.
Use the telephone cable to connect the ADSL socket on the router to the ADSL
wall outlet supplied by Telecom or to a non-filtered telephone wall outlet making
sure that all other telephone outlets are now equipped with filters.
Turn on power to the PC and the router.
3