Avtech 960H Kullanıcı Kılavuzu - Sayfa 3
Güvenlik Kamerası Avtech 960H için çevrimiçi göz atın veya pdf Kullanıcı Kılavuzu indirin. Avtech 960H 4 sayfaları. 960h ultra resolution series
Sayfayı YazdırNOTE: Focus or Flange-Back Ring Adjustment
1. Mount the lens
by turning it clockwise on the lens mount of the camera.
2. Loosen the screws on the flange-back adjusting ring.
3. Turn the flange-back adjusting ring to the desired position.
4. Tighten the screws on the flange-back adjusting ring.
PRECAUTIONS
Do not install the camera in an environment where the humidity or temperature is high
Do not install the camera under the unstable lighting condition
Do not expose the camera to rain or moisture
Do not keep the camera face to strong light directly
Do not touch the front glass of the camera
Do not use other than specified power source
Do not disassemble the camera
CAMERA PARAMETERS
There are five buttons on the camera rear panel for users to further configure camera parameters.
Menu Tree
For options with
, press the button "
SUB-MENU
LANGUAGE
CAMERA ID
EXPOSURE
IMAGE
If you want to ...
Enter the camera configuration menu
Move to the sub-menu you want
Change setting
Enter the configuration page of an option
" (Enter) to enter their respective setting pages.
OPTIONS
LANGUAGE
OSD COLOR
ID SET (POSITION)
ID NO
LENS
BLC
GAIN CONTROL
SHUTTER (1/N)
BRIGHTNESS
CONTRAST
CHROMA GAIN
SHARPNESS
NOISE REDUCTION
WHITE BALANCE
Flange Back Adjusting Ring
Back focal lock hexagonal bolt
ENGLISH / PORTUGUÊS / ESPAÑOL /
FRANCÊS
WHITE / YELLOW / CYAN / GREEN /
MAGENTA / RED / BLUE / BLACK
OFF / TOP / BOTTOM
MANUAL / DC
OFF / PAT 1 / PAT2
AUTO-H / AUTO-M / AUTO-L /
-3 ~ 36dB
AUTO / 60(50) / 100(120) / 250 / 500 /
1000 / 2000 / 5000 / 10000 / 20000 /
50000 / 100000
ON / OFF
Press ...
MENU
↑ / ↓
← / →
ENTER
REMARK