DGP DGP-M2 Kullanıcı Kılavuzu - Sayfa 5
Öğütücü DGP DGP-M2 için çevrimiçi göz atın veya pdf Kullanıcı Kılavuzu indirin. DGP DGP-M2 16 sayfaları. Tungsten grinder
Sayfayı Yazdır3. UNPACKING
Check for shipping damage. Diamond Ground Products takes great pride in producing quality equipment. If for
some reason you find anything to be defective, please call us at: (805) 498-3837 and we will work with you to
solve the problem. The following accessories are shipped with the DGP-M2 and DGP-M2-V2 grinders:
1. Pin Vise used to hold tungsten while grinding.
2. Six different Hex Keys, used to make various adjustments, and one Hex Screwdriver, used to secure the
tungsten in the cutting apparatus.
3. Collets (four of your choice) - used to guide the tungsten and hold it at the proper angle while grinding.
4. WARRANTY
The DGP-M2 & DGP-M2-V2 comes with a one-year warranty on parts and labor, excluding wheels that are a
consumable part that naturally wears over time. This warranty excludes abuse to the machine, dropping of the unit or
improper handling by the operator.
5. SAFETY AND OPERATING GUIDELINES
Before any work is done, read the caution below carefully. Working safely prevents accidents.
• When not in use, turn the grinder off for safety purposes and to decrease wear on the machine.
• Wear proper apparel. Do not wear loose clothing, including gloves, neckties, rings, bracelets, or other jewelry, which
may get caught, in moving parts of the machine.
• Wear protective hair covering to contain long hair.
• Wear safety glasses and a facemask.
• Never operate power tools when tired, intoxicated, or when taking medication that may cause drowsiness.
• Work area should have sufficient lighting.
• A proper electrical outlet should be available for the tools. A three-prong plug should be plugged directly into a three-
prong outlet. Extension cord should be the correct gauge.
• Keep visitors at a safe distance from work area.
• Always unplug grinder prior to inspection.
• Read this manual thoroughly for specific adjustments and operating procedures.
• Do not perform "make-shift" repairs. Any part that is damaged should be promptly replaced.
• Only use the grinder for its intended purpose. Do not use it for a job it was not designed for.
• Make sure that the grinder is off before plugging it in.
• Do not apply extreme force on the tungsten while grinding. This may cause your grinder to jam or cause premature
grinding wheel wear.
• Never leave the grinder unattended. Turn the grinder off first and do not leave it until it comes to a complete stop.
• Know your grinder; learn its operation, applications, and specific limitations.
• Always unplug grinder prior to inspection.
• Read this manual thoroughly for specific adjustments and operating procedures.
• Grinding parts other than tungsten will severely decrease wheel and equipment life.
• Unplug the grinder when changing accessories, such as collets, wheel, or other replacement parts.
• Avoid accidental start-up. Make sure that the grinder is in the off position before plugging it in.
• Do not force the grinder. It will work most efficiently at the rate for which it was designed. Consult the
"Recommended Minimum Cutting and Grinding Time for New Electrodes" sticker on the grinder to determine
optimum rate of speed.
• Use recommended accessories. Use of improper accessories may cause risk of injury of persons or accelerated wear
on the grinder.
• Handle the tungsten and grinder correctly. Consult grinder operation procedures in this manual and handle tungsten
with pin vise whenever possible to protect hands from possible injury.
• Feed tungsten into grinding wheel against the direction of rotation of the wheel.
Document: DGP-M2 User Manual
Page 4
Rev: B
02/03/2022