Avtech AVT420A Kullanıcı Kılavuzu - Sayfa 6

Güvenlik Kamerası Avtech AVT420A için çevrimiçi göz atın veya pdf Kullanıcı Kılavuzu indirin. Avtech AVT420A 8 sayfaları. Hd cctv total solution
Ayrıca Avtech AVT420A için: Kullanıcı Kılavuzu (6 sayfalar)

Sayfayı Yazdır
Step5: Return to the live view, and right click to show the main menu.
Select "ADVANCED CONFIG"  "DCCS". Then, select the channel which connects this camera,
and click "SETUP" to enter the menu of camera parameters.
CAMERA
DETECTION
ALERT
NETWORK
DISPLAY
RECORD
DCCS
NOTIFY
MULTICASTING
EXIT
Step6: Choose "SEQUENCE" to add preset points for area patrol.
ACTIVE NO:
ACTIVE TIME (MINUTES)
No1
No2
No3
No4
No5
No6
No7
No8
No9
No10
No11
No12
No13
No14
ACTIVE TIME (MINUTES)
DWELL TIME
PAN SPEED
Step6: Select "EXIT" and return to the live view.
Step7: Click the channel which connects this camera to display in the full screen mode, and select
to show the control panel.
Then, click "
ADVANCED CONFIG
CH1
CH2
CH3
MENU
SETUP
DEVICE
AVT503S
CONNECTION
OK
SEQUENCE
PRESET
01
No2
02
No4
03
No5
>> 04
No1
<< 05
No3
Select how long the area patrolling lasts in minute.
The options are 2, 3 and 5.
Select the time in second after which to move to the next point. The
time ranges from 3 to 60.
Select how fast to move the camera to the next point. The speed
ranges from 0 to 255.
" (AUTO) to see if the camera starts patrolling.
CH4
DWELL TIME
0
60
0
0
60
0
0
60
0
0
60
0
0
60
0
1
3
P AN SPEED
255
255
255
255
255
EXIT