Avtech AVT583 Kullanıcı Kılavuzu - Sayfa 10

Güvenlik Kamerası Avtech AVT583 için çevrimiçi göz atın veya pdf Kullanıcı Kılavuzu indirin. Avtech AVT583 14 sayfaları. Speed dome camera

SEQUENCE SETUP

Step1: On the DVR live view, click the channel with this speed dome camera connected. Then, click

on the bottom left side of the screen to show the PTZ control panel.

Step2: Click

to display the preset point panel, and click

Step3: Click

numbering you want to appoint for this point. Then, wait till you see

appearing and disappearing on the DVR status bar.

NOTE: Up to 256 preset points could be configured.

Step4: Repeat Step3 until you've added all the points you need, or click

panel.

Step5: In the Goto panel, select the numbering you've appointed for the preset points to check if they're

working properly.

Step6: Return to the live view, and right click to show the main menu.

Select ADVANCED CONFIG  DCCS. Then, select the channel which connects this camera,

and click SETUP to enter the menu of camera parameters.

CAMERA

DETECTION

ALERT

NETWORK

DISPLAY

RECORD

DCCS

NOTIFY

MULTICASTING

EXIT

to move to the point you want to configure as a preset point, and click the

ADVANCED CONFIG

CH1

CH2

CH3

CH4

SETUP

F.W.

1016

DEVICE

AVTXXX

CONNECTION

to go to the setting panel.

(command sending)

to return to the Goto