Dell 5500 Series Kurulum ve Teknik Özellikler Kılavuzu - Sayfa 29

Dizüstü Bilgisayar Dell 5500 Series için çevrimiçi göz atın veya pdf Kurulum ve Teknik Özellikler Kılavuzu indirin. Dell 5500 Series 40 sayfaları. Dell networking 5500 gigabit ethernet switches
Ayrıca Dell 5500 Series için: Teknik Özellikler (2 sayfalar), Hızlı Başlangıç Kılavuzu (18 sayfalar)

Dell 5500 Series Kurulum ve Teknik Özellikler Kılavuzu
Table 31. General (continued)
Option
Date/Time
.

System information

Table 32. System Configuration
Option
Integrated NIC
SATA Operation
Drives
Smart Reporting
USB Configuration
Thunderbolt Adapter
Configuration
USB PowerShare
Audio
Description
Never
Allows you to set the date and time settings. Changes to the system date and time take effect
immediately.
Description
Allows you to configure the on-board LAN controller.
Disabled = The internal LAN is off and not visible to the operating system.
Enabled = The internal LAN is enabled.
Enabled w/PXE = The internal LAN is enabled (with PXE boot) (selected by default)
Allows you to configure the operating mode of the integrated hard drive controller.
Disabled = The SATA controllers are hidden
AHCI = SATA is configured for AHCI mode
RAID ON = SATA is configured to support RAID mode (selected by default)
Allows you to enable or disable the various drives on-board:
SATA-2 (enabled by default)
M.2 PCIe SSD-0 (enabled by default)
This field controls whether hard drive errors for integrated drives are reported during system
startup. The Enable Smart Reporting option is disabled by default.
Allows you to enable or disable the integrated USB controller for:
Enable USB Boot Support
Enable External USB Port
All the options are enabled by default.
This section allows Thunderbolt Adapter Configuration.
Thunderbolt-is enabled by default
Enable Thunderbolt Boot Support-is disabled
No security-is disabled
User configuration-enabled by default
Secure connect-is disabled
Display port and USB Only-is disabled
This option configures the USB PowerShare feature behavior.
Enable USB PowerShare - disabled by default
This feature is intended to allow users to power or charge external devices, such as phones and
portable music players, using the stored system battery power through the USN PowerShare port
on the notebook, while the notebook is in a sleep state.
Allows you to enable or disable the integrated audio controller. The option Enable Audio is selected
by default.
Enable Microphone
Enable Internal Speaker
System setup
29