Dell Adamo 13 Servis Kılavuzu - Sayfa 20

Dizüstü Bilgisayar Dell Adamo 13 için çevrimiçi göz atın veya pdf Servis Kılavuzu indirin. Dell Adamo 13 23 sayfaları.

Sayfayı Yazdır
 
6. Select Run the 32 Bit Dell Diagnostics from the numbered list. If multiple versions are listed, select the version that is appropriate for your computer.
 
7. When the Dell Diagnostics Main Menu appears, select the test that you want to run, and follow the instructions on the screen.
 Troubleshooting Tips
Follow these tips when troubleshooting your computer:
 If a device does not work, ensure that the device is properly connected.
l
 If an error message appears on the screen, write down the exact message. This message may help support personnel to diagnose and fix the problem
l
(s).
 If an error message occurs in a program, see the program documentation.
l
NOTE:
The procedures in this document were written for the Windows default view, so they may not apply if you set your Dell computer to the Windows
Classic view.
 

Power Problems

Before you begin any of the procedures in this section, follow the safety information that shipped with your computer.
 
If the power light is off —
The computer is either turned off or is not receiving power.
 Reseat the power cable in the power connector on the back of the computer and the electrical outlet.
l
 Bypass power strips, power extension cables, and other power protection devices to verify that the computer turns on properly.
l
 Ensure that any power strips being used are plugged into an electrical outlet and are turned on.
l
 Ensure that the electrical outlet is working by testing it with another device, such as a lamp.
l
 
If the power light is blinking white —
The computer is in standby mode. Press a key on the keyboard, move the mouse, or press the power button to resume normal operation.
 
If the power light is blinking amber —
The computer is receiving electrical power, a device might be malfunctioning or incorrectly installed. Contact Dell (see
 
If the power light is steady amber —
There is a power problem, a device may be malfunctioning or incorrectly installed. Contact Dell (see
 
Eliminate interference —
Some possible causes of interference are:
 Power, keyboard, and mouse extension cables
l
 Too many devices connected to the same power strip
l
 Multiple power strips connected to the same electrical outlet
l
 

Memory Problems

Before you begin any of the procedures in this section, follow the safety information that shipped with your computer.
 
If you receive an insufficient memory message —
 Save and close any open files and exit any open programs you are not using to see if that resolves the problem.
l
 See the software documentation for minimum memory requirements.
l
 Run the Dell Diagnostics (see
l
 
Dell
Diagnostics).
Contacting
Dell).
Contacting
Dell).