Dell Alienware M11x R3 Servis Kılavuzu - Sayfa 40
Dizüstü Bilgisayar Dell Alienware M11x R3 için çevrimiçi göz atın veya pdf Servis Kılavuzu indirin. Dell Alienware M11x R3 43 sayfaları. Service manual
Sayfayı YazdırBack to Contents Page
System Board
Alienware® M11x R3 Service Manual
Removing the System Board
Replacing the System Board
Entering the Service Tag in the BIOS
WARNING:
Before working inside your computer, read the safety information that shipped with your computer. For additional safety best
practices information, see the Regulatory Compliance Homepage at www.dell.com/regulatory_compliance.
CAUTION:
To avoid electrostatic discharge, ground yourself by using a wrist grounding strap or by periodically touching an unpainted metal
surface (such as a connector on your computer).
CAUTION:
Only a certified service technician should perform repairs on your computer. Damage due to servicing that is not authorized by Dell™
is not covered by your warranty.
CAUTION:
To help prevent damage to the system board, remove the main battery (see
computer.
CAUTION:
Handle components by their edges, and avoid touching pins and contacts.
The system board's BIOS chip contains the Service Tag, which is also visible on a barcode label at the bottom of the computer.
Removing the System Board
1. Follow the instructions in
Before You
2. Remove any installed card or blank from the 3-in-1 Media Card reader.
3. Remove the base cover (see
4. Remove the battery pack (see
5. Follow the instructions from
6. Remove the Mini-Card(s) (see
7. Remove the memory module(s) (see
8. Remove the hinge cover (see
9. Remove the keyboard (see
10. Remove the palm rest assembly (see
®
11. Remove the Bluetooth
card (see
12. Remove the coin-cell battery (see
13. Remove the display assembly (see
14. Remove the I/O board (see
15. Remove the four screws that secure the system board to the computer base.
Begin.
Removing the Base
Cover).
Removing the Battery
Pack).
step 4
to
step 6
in
Removing the Hard
Removing the
Mini-Card(s)).
Removing the Memory
Module(s)).
Removing the Hinge
Cover).
Removing the
Keyboard).
Removing the Palm Rest
Removing the Bluetooth
Card).
Removing the Coin-Cell
Battery).
Removing the Display
Assembly).
Removing the I/O
Board).
Removing the Battery
Drive.
Assembly).
Pack) before working inside the