Dell D11S Kurulum ve Teknik Özellikler Kılavuzu - Sayfa 30

Dizüstü Bilgisayar Dell D11S için çevrimiçi göz atın veya pdf Kurulum ve Teknik Özellikler Kılavuzu indirin. Dell D11S 35 sayfaları. Small form factor
Ayrıca Dell D11S için: Hızlı Başlangıç Kılavuzu (2 sayfalar), Kurulum ve Özellikler (35 sayfalar), Kullanıcı El Kitabı (45 sayfalar), Kurulum Kılavuzu (22 sayfalar), Kurulum ve Özellikler (37 sayfalar), Kurulum ve Teknik Özellikler Kılavuzu (31 sayfalar)

Flashing the BIOS from the F12 One-Time boot menu

Updating your system BIOS using a BIOS update .exe file copied to a FAT32 USB key and booting from the F12 one time boot menu.

BIOS Update

You can run the BIOS update file from Windows using a bootable USB key or you can also update the BIOS from the F12 One-Time boot

menu on the system.

Most Dell systems built after 2012 have this capability and you can confirm by booting your system to the F12 One-Time Boot Menu to see

if BIOS FLASH UPDATE is listed as a boot option for your system. If the option is listed, then the BIOS supports this BIOS update option.

NOTE:

Only systems with BIOS Flash Update option in the F12 One-Time Boot Menu can use this function.

Updating from the One-Time Boot Menu

To update your BIOS from the F12 One-Time boot menu, you will need:

•

USB key formatted to the FAT32 file system (key does not have to be bootable)

•

BIOS executable file that you downloaded from the Dell Support website and copied to the root of the USB key

•

AC power adapter connected to the system

•

Functional system battery to flash the BIOS

Perform the following steps to execute the BIOS update flash process from the F12 menu:

CAUTION:

Do not power off the system during the BIOS update process. Powering off the system could make the system fail to

boot.

From a power off state, insert the USB key where you copied the flash into a USB port of the system .

Power on the system and press the F12 key to access the One-Time Boot Menu, Highlight BIOS Update using the mouse or arrow

keys then press Enter.

The Bios flash menu will open then click the Flash from file.

System setup