Dell D15S Kurulum ve Özellikler - Sayfa 24

Dizüstü Bilgisayar Dell D15S için çevrimiçi göz atın veya pdf Kurulum ve Özellikler indirin. Dell D15S 34 sayfaları. Small form factor
Ayrıca Dell D15S için: Kurulum ve Teknik Özellikler Kılavuzu (37 sayfalar), Kurulum ve Özellikler (39 sayfalar), Kurulum ve Teknik Özellikler Kılavuzu (23 sayfalar), Kurulum ve Özellikler (21 sayfalar), Kurulum ve Teknik Özellikler Kılavuzu (38 sayfalar)

Sayfayı Yazdır
Dell D15S Kurulum ve Özellikler
Table 34. System and setup password(continued)
Password type
Setup password
You can create a system password and a setup password to secure your computer.
CAUTION:
The password features provide a basic level of security for the data on your computer.
CAUTION:
Anyone can access the data stored on your computer if it is not locked and left unattended.
NOTE:
System and setup password feature is disabled.

Assigning a system setup password

Prerequisites
You can assign a new System or Admin Password only when the status is in Not Set.
About this task
To enter the system setup, press F2 immediately after a power-on or reboot.
Steps
1. In the System BIOS or System Setup screen, select Security and press Enter.
The Security screen is displayed.
2. Select System/Admin Password and create a password in the Enter the new password field.
Use the following guidelines to assign the system password:
•
A password can have up to 32 characters.
•
The password can contain the numbers 0 through 9.
•
Only lower case letters are valid, upper case letters are not allowed.
•
Only the following special characters are allowed: space, ("), (+), (,), (-), (.), (/), (;), ([), (\), (]), (`).
3. Type the system password that you entered earlier in the Confirm new password field and click OK.
4. Press Esc and a message prompts you to save the changes.
5. Press Y to save the changes.
The computer reboots.

Deleting or changing an existing system setup password

Prerequisites
Ensure that the Password Status is Unlocked (in the System Setup) before attempting to delete or change the existing System and
Setup password. You cannot delete or change an existing System or Setup password, if the Password Status is Locked.
About this task
To enter the System Setup, press F2 immediately after a power-on or reboot.
Steps
1. In the System BIOS or System Setup screen, select System Security and press Enter.
The System Security screen is displayed.
2. In the System Security screen, verify that Password Status is Unlocked.
3. Select System Password, alter or delete the existing system password and press Enter or Tab.
4. Select Setup Password, alter or delete the existing setup password and press Enter or Tab.
24
System setup
Description
Password that you must enter to access and make changes to the
BIOS settings of your computer.