Dell d400 - Latitude - Pentium M 1.3 GHz Servis Kılavuzu - Sayfa 11

Dizüstü Bilgisayar Dell d400 - Latitude - Pentium M 1.3 GHz için çevrimiçi göz atın veya pdf Servis Kılavuzu indirin. Dell d400 - Latitude - Pentium M 1.3 GHz 48 sayfaları.

To replace the display latch, you must remove the whole bezel.
1.  Follow the instructions in
"Preparing to Work Inside the
2.  Remove the
hard
drive.
3.  Remove the keyboard.
4.  Open the display 180 degrees, and remove the two rubber screw covers, four rubber screw bumpers, and the six M2.5 x 4-mm screws that secure the
bezel.
 
 
 
1  rubber screw bumpers  6U549
2  bezel
  
3  rubber screw covers
 2U940
4  M2.5 x 4-mm screws
 7116P
5.  Use your fingers to carefully pry around the perimeter of the bezel until the bezel separates from the display assembly.
6.  Remove the two display latch screws, and remove the display latch.
 
 
 
1  M2 x 1.8-mm screws (2)  5H953
2  display latch
  
 
NOTICE:
When you replace the bezel, ensure that the display cable is routed correctly.
Back to Contents Page
 
Computer."