Dell Dimension 5150 Servis Kılavuzu - Sayfa 12
Dizüstü Bilgisayar Dell Dimension 5150 için çevrimiçi göz atın veya pdf Servis Kılavuzu indirin. Dell Dimension 5150 40 sayfaları. Setting up your computer
Ayrıca Dell Dimension 5150 için: Kurulum (2 sayfalar), Kurulum Kılavuzu (2 sayfalar), Kurulum Kılavuzu (2 sayfalar)
CAUTION:
CAUTION:
your computer's electronic components. You can do so by touching an unpainted metal surface.
1. Follow the instructions in
2. Remove the keyboard.
3. Remove the
4. Use a plastic scribe to pry the five screw covers out of the screw holes located on the front of the bezel.
5. Remove the five M2.5 x 5-mm screws located on the front of the bezel.
NOTICE:
6. Starting at the bottom of the display panel, use your fingers to separate the bezel from the top cover and lift the inside edge of the bezel away from
the top cover.
Display Panel
Removing the Display Panel
CAUTION:
CAUTION:
your computer's electronic components. You can do so by touching an unpainted metal surface.
1. Follow the instructions in
2. Remove the keyboard.
3. Remove the
4. Remove the
5. Remove the four M2 x 3-mm screws on the each side of the display panel.
6. Lift the display panel out of the top cover.
7. Disconnect the top flex-cable connector from the display panel connector by peeling up the pull-tab and pulling the tab down and away from the display
panel connector.
1 display panel connector
2 pull-tab
3 top flex-cable connector
8. Disconnect the bottom flex-cable connector from the inverter connector on the system board by peeling up the pull-tab and pulling the tab down and
away from the inverter connector.
Great user manuals database on
Before performing the following procedures, read the safety instructions in your Owner's Manual.
To prevent static damage to components inside your computer, discharge static electricity from your body before you touch any of
"Preparing to Work Inside the
display
assembly.
Carefully separate the bezel from the top cover to avoid damage to the bezel.
Before performing the following procedures, read the safety instructions in your Owner's Manual.
To prevent static damage to components inside your computer, discharge static electricity from your body before you touch any of
"Preparing to Work Inside the
display
assembly.
display
bezel.
UserManuals.info
Computer."
Computer."