Dell Inspiron 600m Servis Kılavuzu - Sayfa 19

Dizüstü Bilgisayar Dell Inspiron 600m için çevrimiçi göz atın veya pdf Servis Kılavuzu indirin. Dell Inspiron 600m 40 sayfaları. Hard drive
Ayrıca Dell Inspiron 600m için: Buradan başlayın (2 sayfalar), Buradan başlayın (2 sayfalar), Buradan başlayın (2 sayfalar), Başlangıç Kılavuzu (2 sayfalar), Kullanıcı Kılavuzu (34 sayfalar), Kurulum Kılavuzu (2 sayfalar), Başlarken (2 sayfalar), Kurulum Kılavuzu (2 sayfalar), Kurulum Kılavuzu (2 sayfalar), Kurulum Kılavuzu (2 sayfalar), Kurulum Kılavuzu (2 sayfalar), Kurulum Kılavuzu (2 sayfalar), Kurulum Kılavuzu (2 sayfalar), Kurulum Kılavuzu (2 sayfalar), Servis Kılavuzu (41 sayfalar), Medya Tabanı Kullanım Kılavuzu (26 sayfalar), Servis Kılavuzu (41 sayfalar), Kurulum ve Yapılandırma (38 sayfalar), Hızlı Başlangıç (2 sayfalar), Hızlı Başlangıç (2 sayfalar), Hızlı Başlangıç (2 sayfalar), Bilgisayarınızın Kurulumu (2 sayfalar), Servis Kılavuzu (41 sayfalar), Servis Kılavuzu (4 sayfalar)

Sayfayı Yazdır

Replacing the Keyboard

1. Place the keyboard face-down on the upper case and flip the keyboard flex cable toward the front of the computer.

NOTICE:

To avoid damage to the connector pins, insert the keyboard flex cable evenly into the ZIF connector on the system board, and do not reverse

the keyboard flex cable.

2. Ensure that the ZIF connector is open by pulling the ZIF connector tabs toward the back of the computer.

3. Press the keyboard flex cable into the ZIF connector.

4. Close the ZIF connector by pushing the ZIF connector tabs toward the front of the computer.

To aid with proper flex cable connection, a locator line has been added near the end of the flex cable. Press the cable into the connector until the line

disappears and hold the cable steady while you close the ZIF connector. (The white line may reappear after the connector is closed, which should not

indicate a problem with the connection.)

NOTICE:

Position the keyboard flex cable so that it is not pinched when you replace the keyboard in the bottom case.

5. Turn the keyboard over and align the four securing tabs on the front of the keyboard with the slots on the upper case.

6. Ensure that all four keyboard securing tabs are engaged in their respective slots before trying to completely seat the keyboard. Press down on the left

and right <Alt> keys to help control tab/slot alignment.

When the keyboard appears to be completely seated, confirm that the front edge of the keyboard is aligned with the edge of the palm rest before

proceeding.

7. Replace the two M2.5 x 5-mm securing screws on the keyboard.

8. Replace the

hinge

cover.

Back to Contents Page