Dell Latitude 3000 Series Servis Kılavuzu - Sayfa 24

Dizüstü Bilgisayar Dell Latitude 3000 Series için çevrimiçi göz atın veya pdf Servis Kılavuzu indirin. Dell Latitude 3000 Series 43 sayfaları. 2-in-1
Ayrıca Dell Latitude 3000 Series için: Kurulum Kılavuzu (2 sayfalar), Kullanıcı Kılavuzu (9 sayfalar), Yardımcı Programları ve Sürücüleri Yükleme (4 sayfalar), Teknik Özellikler (6 sayfalar), Teknik El Kitabı (45 sayfalar), Teknik Özellikler (2 sayfalar), Başlangıç Kılavuzu (28 sayfalar), Kurulum Talimatları (1 sayfalar), Hızlı Başlangıç Kılavuzu (2 sayfalar), Kurulum ve Özellikler (21 sayfalar), Manuel (25 sayfalar)

Sayfayı Yazdır
Dell Latitude 3000 Series Servis Kılavuzu
 
8. To remove the processor from the socket, lift the processor vertically in one motion.
Leave the release lever extended in the release position so that the socket is ready for the new processor.
 

Installing the Processor

NOTICE:
Ground yourself by touching an unpainted metal surface on the back of the computer.
 
1. Unpack the new processor.
NOTICE:
You must position the processor correctly in the socket to avoid permanent damage to the processor and the computer when you turn on the
computer.
 
2. If the release lever on the socket is not fully extended, move it to that position.
 
3. Align the pin-1 corners of the processor and socket.
NOTICE:
Socket pins are delicate. To avoid damage, ensure that the processor is aligned properly with the socket, and do not use excessive force
when you install the process. Be careful not to touch or bend the pins on the system board.
 
4. Set the processor lightly in the socket and ensure that the processor is level in the socket. When the processor is positioned correctly, press it with
minimal pressure to seat it.
 
5. When the processor is fully seated in the socket, close the processor cover.
 
6. Pivot the socket release lever back toward the socket and snap it into place to secure the processor.
NOTICE:
If you are not installing a processor upgrade kit from Dell, reuse the original heat sink assembly when you replace the processor.
If you installed a processor replacement kit from Dell, return the original heat sink assembly and processor to Dell in the same package in which your
replacement kit was sent.
 
7. Install the heat sink: