Allied Telesis AT-PB1001/1 Hızlı Kurulum Kılavuzu
Medya Dönüştürücü Allied Telesis AT-PB1001/1 için çevrimiçi göz atın veya pdf Hızlı Kurulum Kılavuzu indirin. Allied Telesis AT-PB1001/1 2 sayfaları. Gigabit media converters
Sayfayı Yazdır
Technical Specifications
Maximum Operating Temperature:
Maximum Storage Temperature:
Operating Altitude:
Humidity:
EMI/RFI:
Safety:
Immunity:
Electrical Safety and Emission Statement
Standards: This product meets the following standards.
U.S. Federal Communications Commission
RADIATED ENERGY
Note: This equipment has been tested and found to comply with the limits for a Class A digital device pursuant to Part 15 of FCC
Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a
commercial environment. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in
accordance with this instruction manual, may cause harmful interference to radio communications. Operation of this equipment in a
residential area is likely to cause harmful interference in which case the user will be required to correct the interference at his own
expense.
Note: Modifications or changes not expressly approved of by the manufacturer or the FCC, can void your right to operate this
equipment.
This Class A digital apparatus meets all requirements of the Canadian Interference-Causing Equipment Regulations.
Cet appareil numérique de la classe A respecte toutes les exigences du Règlement sur le matériel brouilleur du Canada.
RFI Emission
EN55022 Class A, EN61000-3-2, EN61000-3-3
WARNING: In a domestic environment this product may cause radio interference in which case the user may be required to take
adequate measures.
Immunity
EN55024
Electrical Safety
TUV-EN60950, UL1950 (UL/cUL)
Laser
EN60825
Copyright 2000 Allied Telesyn International, Corp.
All rights reserved. No part of this publication may be reproduced without prior written permission from Allied
Telesyn International, Corp.
Allied Telesyn International Corp.
960 Stewart Drive, Suite B
Sunnyvale, CA 94085 USA
Tel 1 (408) 730-0950 • Fax 1 (408) 736-0100
Visit our web site at: www.alliedtelesyn.co
3
0° C to 40° C (32° F to 104° F)
-25° C to 70° C (-13° F to 158° F)
Up to 3,048 meters (10,000 feet)
5% to 95% (non-condensing)
FCC Class A, EN55022 Class A,
EN61000-3-2, EN61000-3-3
UL 1950 (UL/cUL), EN60950, EN60825
EN55024 Immunity Standard
Industry Canada
e
AT-PB1000 Series
Gigabit Media Converters
Quick Install Guide
For use with the PowerBlade Chassis
Overview
The AT-PB1000 Series Gigabit Media Converter is designed for the PowerBlade
Chassis. This media converter extends the distance of your network by converting
Ethernet data between multimode and single-mode fiber optic cable. The media
converters feature a 1000Base-SX port and a 1000Base-LX port. The 1000Base-SX port
has a maximum operating distance of 550 meters (1,804 feet) while the 1000Base-LX
port has a maximum operating distance of 10 kilometers (6.2 miles) up to 70 kilometers
(43.4 feet) depending on the model. Both ports feature an SC connector and operate at
1000 Mpbs in half-duplex or full-duplex mode.
Related Documents
This quick install guide is an abbreviated version of the installation procedure. For
complete details on the features, functions and installation instructions, refer to the
PowerBlade Chassis Installation Guide. This guide is available from Allied Telesyn's
web site at www.alliedtelesyn.com.
Cable Specifications
The following table lists the cabling distances for the AT-PB1000 Series modules.
1000Base-LX
Model
Type of
Maximum
Connector
Distance
AT-PB1001/1
SC
10 km (6.2 mi)
AT-PB1001/2
SC
20 km (12.4 mi)
AT-PB1001/3
SC
50 km (31 mi)
AT-PB1001/4
SC
70 km (43.4 mi)
1. Assumes 10/125 micron single-mode fiber optic cable.
2. Assumes 50/125 micron multimode fiber optic cable.
PN 613-50149-00 Rev A
1000Base-SX
Type of
Maximum
1
2
Connector
Distance
SC
550 m (1,804 ft)
SC
550 m (1,804 ft)
SC
550 m (1,804 ft)
SC
550 m (1,804 ft)
010213