DGTech HyperRemote v.1.1 Kullanıcı Kılavuzu - Sayfa 5

Yazılım DGTech HyperRemote v.1.1 için çevrimiçi göz atın veya pdf Kullanıcı Kılavuzu indirin. DGTech HyperRemote v.1.1 9 sayfaları. V.1.1

User Guide HyperRemote ver. 1.1

Capitolo 2

First use

Once the PC has restarted Hyperremote automatically starts, then the following window appears.

This window is the control panel of HyperRemote. From this window it is possible to manage all

the software parameters.

From the control panel it is possible to modify 4 parameters:

Send Signal: if set, the software send a beep any time a coloured button on the remote is

pressed.

Close after 10s: if set, the control panel will close itself automatically after 10 seconds of

inactivity. The control panel can be opened or closed by pressing the yellow small button on

the remote.

Pointer velocity: by modifying this property it is possible to set the velocity of the mouse

pointer (it works only when the mouse mode is set)

Acceleration: change this parameter in order to modify the acceleration of the mouse

pointer (this property works only when in mouse mode)

Moreover, the control panel reports information about the state of the program: active operative

mode (mouse mode or remote mode), drag mode state (ON or OFF) and a brief description of the

different functionalities of the remote buttons, depending on the active operative mode.

DGTech Engineering Solution