Allied Telesis AT-A40/SC Veri Sayfası - Sayfa 2
Ağ Donanımı Allied Telesis AT-A40/SC için çevrimiçi göz atın veya pdf Veri Sayfası indirin. Allied Telesis AT-A40/SC 2 sayfaları. Rapier series uplink modules gigabit & fast ethernet
Sayfayı Yazdır
Rapier Series Uplink Modules
Competitive Matrix
Model
Port
AT-A35/SX
1000SX
AT-A35/LX
1000LX
AT-A39/T
10/100/1000T
4
AT-A40/SC
100FX
(multimode fiber, 1300nM)
AT-A40/MT
100FX
(multimode fiber, 1300nM)
AT-A41/SC
100FX
(multimode fiber, 1300nM)
AT-A41/MT
N100FX
(singlemode fiber, 1300nM)
AT-A42/GBIC 1000X
1. Refer to the IEEE 802.3 standards for further cable information.
2. Assumes a fiber optic cable rating of 500 Mhz/Km.
(Maximum cable length is 500m at a cable rating of 400 Mhz/Km.)
3. Assumes a fiber optic cable rating of 200 Mhz/Km.
(Maximum cable length is 220m at a cable rating of160 Mhz/Km.)
(ATR)
singlemode/
Wavelength Tx power (dBm)
Model
multimode
AT-A35/SX
multimode fiber
850
AT-A35/LX
singlemode fiber
1310
multimode fiber
multimode fiber
AT-A40/SC
multimode fiber
1310
AT-A40/MT multimode fiber
1310
AT-A41/SC
singlemode fiber
1310
AT-A41/MT singlemode fiber
1310
USA Headquarters
|
19800 North Creek Parkway
European Headquarters
|
Via Motta 24
Asia-Pacific Headquarters
|
11 Tai Seng Link
www.alliedtelesis.com
© 2006 Allied Telesis Inc. All rights reserved. Information in this document is subject to change without notice. All company names, logos, and product designs that are trademarks or registered trademarks are the property of their respective owners.
| Gigabit & Fast Ethernet
Connector
Cable Type
1
SC
50/125 micron
multimode fiber
62.5/125 micron
multimode fiber
SC
9/125 micron
singlemode fiber
50/125 or 62.5/125
micron multimode fiber
RJ-45
CAT5
CAT5E
SC
50/125 or 62.5/125
micron multimode fiber
MT-RJ
50/125 or 62.5/125
micron multimode fiber
SC
50/125 or 62.5/125
micron multimode fiber
MT-RJ
9/125 micron
singlemode fiber
Varies per GBIC Refer to GBIC documentation Refer to GBIC documentation
4. Early versions of the AT-A39/T operate at 1000Mbps only.
10/100/1000Mbps operation is available only if the AT-A39/T
Uplink Module is installed in a Rapier G6, Rapier G6F or
Rapier i model, otherwise operation is fixed at 1000Mbps.
Sensitivity (dBm) Saturation (dBm)
-4 to -9.5
-12.5 @ 62.5uM,
-13.5 @ 50uM
-3 to -9.5@9uM,
-20
-3 to [email protected],
-3 to -11.5@50uM
-14 to [email protected],
-34.5
-14 to -22.5@50uM
-14 to [email protected],
-34.5
-14 to -22.5@50uM
-14 to -20
-31
-14 to -20
-31
|
Suite 200
|
Bothell
|
6830 Chiasso
|
Switzerland
|
|
Singapore
|
534182
|
T: +65 6383 3832
Max Cable Length
550 m (1,804ft)
2
275 m (902ft)
3
3km (1.8mi) increasing to
10km (6mi) if linking
two 1000LX models
550m (1804ft)
2
100 to 150m (328 to 492ft)
200m (656ft)
2km
2km
2km
15km
0
-3
-14
-14
-8
-8
|
WA 98011
|
USA
|
T: +1 800 424 4284
T: +41 91 69769.00
|
F: +41 91 69769.11
|
F: +65 6383 3830
Ordering Information
AT-A35/SX
1 x 1000SX/SC uplink with SC connector
AT-A35/LX
1 x 1000LX/SC uplink with SC connector
AT-A39/T
1 x 1000T uplink with RJ-45 connector
AT-A40/SC
100FX multimode fiber uplink
with SC connector
AT-A40/MT
100FX multimode fiber uplink
with MT connector
AT-A41/SC
100FX singlemode fiber uplink
with SC connector
AT-A41/MT
100FX singlemode fiber uplink
with MT connector
AT-A42/GBIC
Uplink module with 1 GBIC bay
(Uses Allied Telesis standards-based
GBIC modules. GBIC ordered separately)
|
F: +1 425 481 3895
617-00458-00 Rev. G