Avtech AVX912R Kullanıcı Kılavuzu - Sayfa 3

Medya Dönüştürücü Avtech AVX912R için çevrimiçi göz atın veya pdf Kullanıcı Kılavuzu indirin. Avtech AVX912R 4 sayfaları. Eoc ethernet over coaxial converter

Sayfayı Yazdır

CONNECTIONS

For the AVX912R (receiver)*:

Step 1: Plug in AVX912R

Step 2: Connect the network cable of the NVR to the "ETHERNET" port of AVX912R. If "Link"

LED is blinking red, please go on with the following steps, but if it is red on, please go

check the connection between the NVR and AVX912R.

Step 3: Connect the existing coaxial cable to the "COAXIAL" port of AVX912R. At this moment,

"Link" LED is blinking red.

For the AVX912T (transmitter)*:

Step 4: Plug in AVX912T

Step 5: Connect the network cable of the IP cameras to the "ETHERNET" port of AVX912T. If

"Link" LED is blinking red, please go on with the following steps, but if it is red on, please

make sure the connection between the IP cameras and AVX912T.

Step 6: Connect the existing coaxial cables to the "COAXIAL" port of AVX912T. If "Link" LED is

blue on, the connection is completed successfully. However, if it is still blinking red, a

coaxial connection error occurs, so please go check the coaxial connection.

Note:

*AVX912R is to connect to a NVR, while AVX912T is to connect to IP cameras; if not connecting to the

corresponding devices, it will affect the transmission rates.

**It is feasible to change the connection sequence of AVX912R and AVX912T. If a user chooses to connect

AVX912T first (in our example, we connect AVX912R first), please follow the steps above to complete the

connection as well.

***AVX912 supports up to 22Mbps transmission rate for using multiple IP cameras at a time; it is recommended to

connect AVX912 to three Megapixel cameras at most for the best viewing. If transmission speed exceeds the limit, it

may affect the video smoothness.

****When using 5C2V coaxial cable, maximum transmission distance is up to 400m; it's not allowed to use a signal

booster to extend the distance. Besides, the distance of connection and transmission speed might be affected by

the cable quality and installation environment.