Dell Precision 3930 Rack Kurulum ve Özellikler - Sayfa 20
Dizüstü Bilgisayar Dell Precision 3930 Rack için çevrimiçi göz atın veya pdf Kurulum ve Özellikler indirin. Dell Precision 3930 Rack 37 sayfaları.
Ayrıca Dell Precision 3930 Rack için: Kurulum Kılavuzu (13 sayfalar)
Sayfayı Yazdır
The one-time boot menu displays the devices that you can boot from including the diagnostic option. The boot menu options are:
•
Removable drive (if available)
•
STXXXX drive
NOTE:
XXX denotes the SATA drive number.
•
Optical drive (if available)
•
SATA hard drive (if available)
•
Diagnostics
NOTE:
Choosing Diagnostics, will display the ePSA diagnostics screen.
The boot sequence screen also displays the option to access the system setup screen.
System setup options
NOTE:
Depending on the tabletcomputernotebook and its installed devices, the items listed in this section may or may not
appear.
General options
Table 18. General
Option
System Information
Boot Sequence
Advanced Boot Options
UEFI Boot Path Security
Date/Time
20
System setup
Description
Displays the following information:
•
System Information: Displays BIOS Version, Service Tag, Asset Tag, Ownership Tag, Ownership
Date, Manufacture Date, and the Express Service Code.
•
Memory Information: Displays Memory Installed, Memory Available, Memory Speed, Memory
Channel Mode, Memory Technology, DIMM A Size,, DIMM B Size, DIMM C Size, DIMM D
Size.
•
PCI Information: Displays Slot1, Slot2, Slot3.
•
Processor Information: Displays Processor Type, Core Count, Processor ID, Current Clock
Speed, Minimum Clock Speed, Maximum Clock Speed, Processor L2 Cache, Processor L3
Cache, HT Capable, and 64-Bit Technology.
•
Device Information: Displays SATA-0, SATA 1, SATA 2, SATA 3, M.2 PCIe SSD-0, M.2 PCIe
SSD-1, LOM MAC Address, LOM2 MAC Address, Video Controller, Audio Controller.
Allows you to specify the order in which the computer attempts to find an operating system from the
devices specified in this list.
Allows you to select the Enable Legacy Option ROMs option, when in UEFI boot mode. By default,
this option is selected.
•
Enable Legacy Option ROMs
•
Enable Attempt Legacy Boot
•
Default— None Selected
This option controls whether or not the system will prompt the user to enter the Admin password
when booting a UEFI boot path from the F12 Boot Menu.
•
Always, Except Internal HDD—Default
•
Always
•
Never
Allows you to set the date and time settings. Changes to the system date and time take effect
immediately.