ensol ES1V2.0 Kurulum Talimatı - Sayfa 11
İnvertör ensol ES1V2.0 için çevrimiçi göz atın veya pdf Kurulum Talimatı indirin. ensol ES1V2.0 20 sayfaları. Flat solar collectors
Sayfayı Yazdırof the flat solar collectors models ES1V2.0, ES1V2.65,
Directions
The nut should be tightened up so as to secure the leak-tightness of the
connection, however, not too strong in order to avoid damage to the
connector pipe of the collector.
4.2.4 Connection of the collectors feeding
1 – connector pipe of the collector
2 – strengthening sleeve
3 – nut
4 – clamping ring
5 – elbow body
6 – insulated flexible conduit
−
place the strengthening sleeve (2) in the connector pipe of the collector (1),
−
elbow nut (3) should be put on the connector pipe of the collector (1),
−
clamping ring (4) should be placed on the connector pipe of the collector (1),
−
screw the nut (3) onto the elbow (5),
−
flexible cord nut (6) needs to be screwed on the elbow (5),
−
connect the flexible conduit to the solar system.
4.2.5 Connection of the collector return
1 – connector pipe of the collector,
2 – strengthening sleeve,
3 – clamp nut,
4 – clamping ring,
5 – complete pipe-cross with a manual air
escape and an immersion sleeve,
6 – insulated flexible conduit
−
place the strengthening sleeve (2) in
the connector pipe of the collector (1),
−
put the clamp nut (3) on the connector pipe of the collector (1),
−
place the clamping ring (4) on the connector pipe of the collector (1),
−
immersion sleeve with the complete pipe-cross (5) needs to be placed in the
connector pipe of the collector (1),
−
screw the clamp nut (3) onto the pipe-cross (5) at the left side,
−
screw the insulated flexible conduit (6) at the bottom of the pipe-cross (5),
−
connect the flexible conduit to the solar system.
4.2.6 Connection of the clamps - for collectors ES2V/2.0 AL, ES2V/2,65
Mount the clamps on the empty connectors (on the diagonal of the collector or the
battery).
1. Clamp
2. Solar collector
Installation instruction
ES2V/2.0 AL, ES2V/2.65
integrated in the slate roof.