Allied Telesis AT-MC103XL Veri Sayfası

Ağ Donanımı Allied Telesis AT-MC103XL için çevrimiçi göz atın veya pdf Veri Sayfası indirin. Allied Telesis AT-MC103XL 2 sayfaları. 8500 series
Ayrıca Allied Telesis AT-MC103XL için: Teknik Özellikler (6 sayfalar)

Sayfayı Yazdır

Datasheet |

Media Converters

MC10x series

Fast Ethernet Media Converters

AT -MC101XL

TX to FX Fast Ethernet media converter with

multi-mode ST fiber connectors

AT -MC102XL

TX to FX Fast Ethernet media converter with

multi-mode SC fiber connectors

AT -MC103XL

TX to FX Fast Ethernet media converter with

single-mode 15km SC fiber connectors

AT -MC103LH

TX to FX Fast Ethernet media converter with

single-mode 40km SC fiber connectors

Fiber Connections

The Allied Telesis range of Fast Ethernet Media

converters provides a complete family of

conversion devices, allowing users to extend the

size of UTP networks with the use of fiber

cabling. Supporting both SC and ST fiber

connectors, these converters can be used to

extend networks with up to 2km of multi-mode

fiber or 40km of single-mode fiber.

Auto-Negotiation and MissingLink™

The MissingLink™ feature enables the fiber

optic ports on the media converter to pass the

'Link' status of their connections to each other.

When the media converter detects a problem

with one of the ports, such as the loss of

connection to an end-node, the media

converter shuts down the connection to the

other port, thus notifying the node that the

connection has been lost.

Allied Telesis

Simple Installation

All the media converters feature Auto

MDI/MDI-X, allowing the converter to be

connected to either a PC, hub or switch with a

simple UTP cable.The media converters also

allow the installer to test the integrity of fiber

connection, by forcing the converters to

communicate over the fiber cable.This 'Link Test'

feature allows installers to check for cable faults

without the need for expensive fiber optic test

equipment.

Standalone or Rack-mounted

Each small media converter is powered by an

external power supply unit for use in standalone

applications. Where multiple media converters

are being used, up to 12 standalone devices can

be inserted into a low-cost rack-mount chassis,

allowing all the converters to be powered by a

single internal power supply. In critical

applications, a second load sharing internal

power supply can be installed into the rack-

mount chassis.

Hassle Free Support

Allied Telesis Fast Ethernet media converters

offer free technical support, ensuring trouble-

free installation.

Key Features

•

Half and full-duplex operation

•

Transparent to IEEE 802.1Q packets

•

Rack-mountable using optional

AT-MCR12, AT-TRAY4 or AT-TRAY1 chassis

•

Wall-mountable using AT-WLMT

•

Auto MDI/MDI-X

•

MissingLink™

•

Link Test

•

RoHS Compliant