Dell Studio XPS 1340 Servis Kılavuzu - Sayfa 35

Dizüstü Bilgisayar Dell Studio XPS 1340 için çevrimiçi göz atın veya pdf Servis Kılavuzu indirin. Dell Studio XPS 1340 40 sayfaları.

Sayfayı Yazdır
Back to Contents Page
  AC Adapter Connector
Dell™ Studio XPS™ 1340 Service Manual 
  Removing the AC Adapter Connector
  Replacing the AC Adapter Connector
 
CAUTION:
Before working inside your computer, read the safety information that shipped with your computer. For additional safety best
practices information, see the Regulatory Compliance Homepage at www.dell.com/regulatory_compliance.
 
NOTICE:
To avoid electrostatic discharge, ground yourself by using a wrist grounding strap or by periodically touching an unpainted metal surface
(such as the back panel) on the computer.
 
NOTICE:
Only a certified service technician should perform repairs on your computer. Damage due to servicing that is not authorized by Dell™ is 
not covered by your warranty.
 
NOTICE:
To help prevent damage to the system board, remove the main battery (see
inside the computer.
 Removing the AC Adapter Connector
 
1. Follow the instructions in
Before You
 
2. Remove the eSATA connector (see
 
3. Remove the screw that secures the AC adapter connector.
 
4. Remove the AC adapter cable from the routing guide.
 
5. Lift the AC adaptor connector and cable out of the computer base.
1
screw
3
cable routing
 Replacing the AC Adapter Connector
 
1. Place the AC adapter connector in the computer base.
 
2. Replace the screw that secures the AC adapter connector.
 
3. Route the AC adapter cable through the routing guide.
 
NOTICE:
Before turning on the computer, replace all screws and ensure that no stray screws remain inside the computer. Failure to do so may
result in damage to the computer.
 
Begin.
Removing the eSATA
Connector).
2
AC adaptor connector
 
 
Before Working Inside Your
Computer) before working