Dell Studio XPS 1640 Servis Kılavuzu - Sayfa 20

Dizüstü Bilgisayar Dell Studio XPS 1640 için çevrimiçi göz atın veya pdf Servis Kılavuzu indirin. Dell Studio XPS 1640 49 sayfaları.

Back to Contents Page

Display Assembly

Dell™ Studio XPS™ 1640 Service Manual

Removing the Display Assembly

Replacing the Display Assembly

CAUTION:

Before working inside your computer, read the safety information that shipped with your computer. For additional safety best

practices information, see the Regulatory Compliance Homepage at www.dell.com/regulatory_compliance.

NOTICE:

To avoid electrostatic discharge, ground yourself by using a wrist grounding strap or by periodically touching an unpainted metal surface (such

as a connector on the back of the computer).

NOTICE:

Only a certified service technician should perform repairs on your computer. Damage due to servicing that is not authorized by Dell™ is not

covered by your warranty.

NOTICE:

To help prevent damage to the system board, remove the main battery (see

computer.

NOTICE:

To avoid damage to the display, you must not disassemble your Edge-to-Edge display assembly in the field.

Removing the Display Assembly

1. Follow the instructions in

Before You

2. Remove the palm rest (see

3. Remove the optical drive (see

4. Make note of the Mini-Card cable routing and carefully dislodge the Mini-Card antenna cables from their routing guides.

5. Remove the two screws from the computer base.

6. Turn the computer over.

7. Pull the Mini-Card cables out through the system board so that they are clear of the computer base.

8. Make note of the display cable, camera cable, and power/battery light cable routing and carefully dislodge the cables from their routing guides.

Begin.

Removing the Palm

Rest).

Removing the Optical

Drive).

Before Working Inside Your

Computer) before working inside the