Dell Vostro 5402 Kurulum ve Teknik Özellikler Kılavuzu - Sayfa 30
Dizüstü Bilgisayar Dell Vostro 5402 için çevrimiçi göz atın veya pdf Kurulum ve Teknik Özellikler Kılavuzu indirin. Dell Vostro 5402 44 sayfaları.
Ayrıca Dell Vostro 5402 için: Kurulum ve Teknik Özellikler Kılavuzu (21 sayfalar)
Sayfayı Yazdır
Table 33. Security (continued)
Option
SMM Security
Mitigation
Data Wipe on Next Boot
Absolute
UEFI Boot Path Security Controls whether the system prompts the user to enter the admin password (if set) when
Password
Table 34. Security
Option
Admin Password
System Password
30
System setup
Description
● PPI Bypass for Disable Commands
● PPI Bypass for Clear Command
● Attestation Enable—This option is enabled by default.
● Key Storage Enable—This option is enabled by default.
● SHA-256—This option is enabled by default.
● Clear
● TPM State—This option is enabled by default.
Allows you to enable or disable additional UEFI SMM Security Mitigation protection.
SMM Security Mitigation - By default, this option is enabled.
Allows BIOS to queue up data wipe cycle for storage devices connected to the motherboard on
the next reboot.
Start Data Wipe - By default, this option is disabled.
NOTE:
Secure Wipe operation deletes information in a way that it cannot be reconstructed.
This field allows you to Enable, Disable, or Permanently Disable the BIOS module interface of the
optional Absolute Persistence Module service from Absolute® Software.
The options are:
● Enabled—This option is enabled by default.
● Disabled
● Permanently Disable Absolute
booting to a UEFI boot path device from the F12 boot menu.
The options are:
● Never
● Always
● Always Except Internal HDD—This option is enabled by default.
● Always Except Internal HDD&PXE
Description
Allows you to set, change, or delete the administrator (admin) password.
The entries to set password are:
● Enter the old password:
● Enter the new password:
Press Enter once you enter the new password and again press Enter to confirm the new
password.
NOTE:
Deleting the admin password deletes the system password (if set). The admin
password can also be used to delete hard drive password. For this reason, you cannot set an
admin password if a system password or hard drive password is set. Hence, an admin
password has to be set first if the admin password has to be used with system password
and/or hard drive password.
Allows you to set, change, or delete the system password.