Dell Vostro V13 Servis Kılavuzu - Sayfa 2

Dizüstü Bilgisayar Dell Vostro V13 için çevrimiçi göz atın veya pdf Servis Kılavuzu indirin. Dell Vostro V13 41 sayfaları. Dell vostro v13: install guide
Ayrıca Dell Vostro V13 için: Kurulum ve Özellik Bilgileri (6 sayfalar)

Sayfayı Yazdır

Back to Contents Page

System Setup

Dell™ Vostro™ V13 Service Manual

Overview

Entering System Setup

System Setup Screens

System Setup Options

Overview

Use System Setup as follows:

To change the system configuration information after you add, change, or remove any hardware in your computer

To set or change a user-selectable option such as the user password

To read the current amount of memory or set the type of hard drive installed

Before you use System Setup, it is recommended that you write down the System Setup screen information for future reference.

CAUTION:

Unless you are an expert computer user, do not change the settings for this program. Certain changes can make your computer work

incorrectly.

Entering System Setup

1. Turn on (or restart) your computer.

2. When the blue DELL™ logo is displayed, you must watch for the F2 prompt to appear.

3. Once this F2 prompt appears, press <F2> immediately.

NOTE:

The F2 prompt indicates that the keyboard has initialized. This prompt can appear very quickly, so you must watch for it to display, and then

press <F2>. If you press <F2> before you are prompted, this keystroke will be lost.

4. If you wait too long and the operating system logo appears, continue to wait until you see the Microsoft

computer and try again.

System Setup Screens

Menu — Appears on top of the System Setup window. This field provides a menu to access to the System Setup options. Press <\xdf >and< >keys to

navigate. As a Menu option is highlighted, the Options List, lists the options that define the hardware installed on you computer.

Options List — Appears on the left side of the System

Setup window. The field lists features that define the

configuration of your computer, including installed

hardware, power conservation, and security features.

Scroll up and down the list with the up- and down-

arrow keys. As an option is highlighted, the Options

Field displays the option's current and available

settings.

Key Functions — Appears below the Options Field and lists keys and their functions within the active system setup field.

Use the following keys to navigate through System Setup screens:

Keystroke

< F2 >

Displays information on any selected item in the System Setup.

Exit from current view or switch the current view to the Exit page in the

< Esc >

System Setup.

< Up Arrow > or < Down

Select an item to display.

Arrow >

< Left Arrow > or < Right

Select a menu to display.

Arrow >

– or +

Change existing item value.

< Enter >

Select the sub menu or execute command.

< F9 >

Load setup default.

< F10 >

Save current configuration and exit System Setup.

Options Field — Appears on the right side of Options List

and contains information about each option listed in the

Options List. In this field you can view information about

your computer and make changes to your current settings.

Press <Enter> to make changes to your current settings.

Press <ESC> to return to the Options List.

NOTE:

Not all settings listed in the Options Field are

changeable.

Action

Windows

desktop. Then, shut down your

Help — Appears on the right side of

the System Setup window and

contains help information about the

option selected in Options List.